User Training‎ > ‎Maintenance Tracking‎ > ‎Aircraft‎ > ‎

Component Inspections

Locate the flying item either in the parts module or in the aircraft module by clicking on the serial number.


Once in the item click on the Aircraft Item Details Tab and in the "Current Inspection" section click "Add a new Inspection".

Add inspection data and click "Save".

The inspection will display on the Aircraft Item Details Tab

and on the Aircraft Module Inspections Tab.  Hovering over the spanner icon will display which component the inspection is linked to.

The Component Tabs show there is a component inspection by displaying [IN] after the component part number.

Clicking [IN] will display the component inspection details.


Component Inspections - Multiple Limitations

If the Component Inspection requires multiple limitations these cannot be added via the Aircraft Inspection Tab -



Instead open the item via the Component Tab by clicking on the serial number -

On the Aircraft Item Details Tab select "Add a New Inspection"

Add inspection data and click "Save".

The inspection will display on the Aircraft Item Details Tab

The Aircraft Inspection Tab now shows both limitations -

On the Component Tabs click [IN] -

Component Inspection details display for multiple limitations -


Comments